---
title: Integrating with TE Recruit (Formerly Big Biller)
slug: integrating-with-te-recruit-formerly-big-biller
icon: 🏀
docTags: 
createdAt: 2026-10-21T22:37:20.030Z
---

## Integrate TE Recruit with Pin

Connect Pin to TE Recruit (Formerly Big Biller) so candidates from your Pin positions sync into your ATS. Setup takes about five minutes: you create an API integration in TE Recruit, paste its credentials into Pin, and approve access.

## Before you begin

- A Pin account with access to **Settings**.
- A TE Recruit account that can open **Settings → TE Recruit Open API → API Integrations**.
- Pin and TE Recruit open in two browser tabs. You'll copy values between them.

:::hint{type="warning"}
**Important**: TE Recruit shows the Client Secret only once. Have Pin's setup screen ready before you create the integration so you can paste the secret straight in.
:::

## Step 1: Copy Pin's Redirect URI

1. In Pin, open **Settings** and select **ATS Integration** under **Integrations**.
2. Choose **TE Recruit**. The **Configure ATS connection** form opens.
3. Copy the full **Redirect URI**:

:::BlockQuote
https\://api.pin.com/ats\_integrations/oauth/te\_recruit/callback
:::

![](https://api.archbee.com/api/optimize/JtqPsvk-s0xQ7dgMBVpor/zu4FFim3Bmv0-s5K3d-z9_1.png)

Leave this tab open. You'll come back to paste the Client ID and Client Secret.

## Step 2: Create an API integration in TE Recruit

1. In TE Recruit, click the gear icon in the top navigation to open **Settings**.
2. Under **TE Recruit Open API**, click **API Integrations**.

![](https://api.archbee.com/api/optimize/JtqPsvk-s0xQ7dgMBVpor/dV_ZBAF0RkvKhhIeg_83C_2.png)

3. Click **Create New Integration**.

![](https://api.archbee.com/api/optimize/JtqPsvk-s0xQ7dgMBVpor/zsV8OeYF-yEkre7Gfmzxw_3.png)

4. Fill in the form:
   - **Name:** anything you'll recognize, such as Pin.
   - **Scopes:** select **read** and **write**.
   - **Redirect URIs:** paste the Redirect URI you copied from Pin.
5. Save the integration. The **New API Integration** window shows your **Client ID** and **Client Secret**.

![](https://api.archbee.com/api/optimize/JtqPsvk-s0xQ7dgMBVpor/REnD0xh4JSut2ywghx1n0_screenshot-2026-10-21-at-64551-pm.png)

6. Copy the **Client ID** and **Client Secret** using the copy buttons beside each field.

![](https://api.archbee.com/api/optimize/JtqPsvk-s0xQ7dgMBVpor/eHpfxJRcORkWXkR4wGeQE_4.png)

:::hint{type="warning"}
**Warning**: Don't close this window until both values are pasted into Pin. Once it closes, TE Recruit won't show the Client Secret again, and you'll need to create a new integration.
:::

You don't need the **Authorize URL** or **Token URL**. Pin uses them automatically.

## Step 3: Paste the credentials into Pin

1. Return to the **ATS Integration** tab in Pin.
2. Paste the **Client ID** into the **Client ID** field.
3. Paste the **Client Secret** into the **Client Secret** field.
4. Click **Continue to TE Recruit**. The button stays disabled until both fields are filled.

![](https://api.archbee.com/api/optimize/JtqPsvk-s0xQ7dgMBVpor/brjCtDpbFzAOg8_eO3uBa_5.png)

## Step 4: Authorize Pin in TE Recruit

1. TE Recruit opens an authorization prompt asking to let your integration access your TE Recruit account. Check that the email shown is the TE Recruit account you want to connect.
2. Confirm it lists **Read** and **Write** access.
3. Click **Authorize**.

![](https://api.archbee.com/api/optimize/JtqPsvk-s0xQ7dgMBVpor/nFSCmSmwefdTzr4tNrO9f_6.png)

TE Recruit sends you back to Pin. If you click **Deny**, no connection is made and you can start again from Step 3.

## Step 5: Confirm the connection and map your positions

Back in Pin, the **ATS Integration** page shows **TE Recruit — Connected**. Below it, each Pin position is listed with two settings:

| Setting          | What it controls                                                                                |
| ---------------- | ----------------------------------------------------------------------------------------------- |
| **Sync to ATS**  | When a candidate is sent to TE Recruit, for example when they're added to an outreach sequence. |
| **ATS Position** | The TE Recruit job the candidate is attached to. Defaults to **No Job Selected**.               |

For each position you want to sync:

1. Choose when candidates should sync under **Sync to ATS**.
2. Pick the matching TE Recruit job under **ATS Position**.

Use **Filters** to narrow a long list of positions. You can also manage syncing per position in **Pin automations**.

## Troubleshooting

**I closed the TE Recruit window before copying the Client Secret.** 
The secret can't be retrieved. Delete that integration in **API Integrations** and create a new one (Step 2).

**The authorization step fails or doesn't return to Pin.** 
Check that the **Redirect URIs** field in TE Recruit exactly matches the Redirect URI in Pin, with no extra spaces or missing characters.

**Continue to TE Recruit is greyed out.** 
Both the Client ID and Client Secret fields must be filled.

**I want to disconnect.** 
On Pin's **ATS Integration** page, click **Disconnect**. To fully revoke access, also delete the integration in TE Recruit's **API Integrations** list.

**I'm not able to create an API key in TE Recruit**
Only users with the Manage API Credentials permission can create API keys in TE Recruit. Typically, this permission is assigned to the Main Contact of the account by default. If other users require this capability, an admin with the necessary permissions can update their user profile settings to grant it.

For further guidance, check out TE Recruit's [Setting API Access Permissions guide](https://help.topechelon.com/article/1027-setting-api-access-permissions).